Testing Communications

1. Press [*][6].
2. Enter the 4-digit master code. (This is usually the same as your alarm code)
   You will hear 3 quick beeps if the code was correct.
   You will hear 1 long beep if the code was incorrect and you can try again.
3. Press [4].
• The siren will go off for 3 seconds.
4. Wait for 5 minutes. During that time, you may hear a series of quick beeps. That confirms the communication was received.
5. If you still have the yellow trouble light, call Scott Security Technical Support: (604) 451-0300